Training

Archive for the ‘Rehabilitation & Biomechanics’ Category

The Benefits of Post-Ride/Race Massage

Friday, July 29th, 2011

The Benefits of Post-Ride/Race Massage

By Jenn O’Connor of Sustainable Wellness Massage

  1. Recover faster
  2. Reduce/prevent injury
  3. Relax/elongate your muscles
  4. Improve Circulation
  5. Flush metabolic cellular waste byproducts
  6. Calm your nervous system
  7. Relieve Pain
  8. Feel Better

Post-race massage plays an important role in supporting a rider to perform at his/her best.  Massage helps to speed the recovery process by relaxing and elongating muscle tissue, improving circulation, calming the nervous system, and relieving pain.

Post-race massage involves several techniques, which increase blood flow to muscles.  This is important because improved circulation brings essential nutrients to deprived muscle tissue and removes the build up of cellular waste byproducts.  This promotes healthy muscles and leads to better performance on the bike.

Sustained riding puts muscles in a more shortened state.  This decrease in length may limit a rider’s range of motion, and in turn reduce power output.  Massage helps to elongate muscles and return them to a more normal length after a ride.

When competing, most riders experience an increase in some hormone levels including epinephrine (adrenaline).  While this is advantageous for a cyclist during an event, it is also necessary to return this hormone to normal levels soon after a competition.  When levels are more normal, healing processes are more optimal.  Massage has a direct impact on calming the nervous system, which helps to facilitate this process and promote a greater state of health.

Pain relief is another important aspect of maintaining optimal performance on a bike and is complemented by all of the processes previously described.  For example, during periods of high intensity exercise, there is increased pressure on muscles, which results in micro-tears along the actin and myosin junction of a muscle fiber.  As with any trauma, muscle tissue needs oxygen and nutrients (which travel in the blood) in order to heal.  An increase in circulation from massage, quickly facilitates this necessary delivery.  When muscles get what they need, they can begin to repair damaged areas more efficiently and the rider will begin to feel better sooner.  Massage is a comprehensive practice that synergistically supports the rider to perform better.

Check out the following website for more information:

http://www.livestrong.com/article/115532-benefits-sports-massage-therapy/

Interview with Frankie Andreu: Massage, Cycling, and Recovery

Article by Jenn O’Connor of Sustainable Wellness Massage in Williston, Vermont

Check out Jenn’s site at http://sustainablewellnessvt.com/

New England Triathlon Symposium

Wednesday, December 29th, 2010

New England Triathlon Symposium – Presented by Blackstone Valley Human Performance and Tri-Hard Endurance Sports Coaching

On Saturday, January 15, 2011 come and experience a day of expert-led seminars, clinics, & workshops to jump start your 2011 triathlon season.

You’ll get to attend four seminars, four hands-on clinics, and two small-group workshops led by expert coaches!

Attendees will be entered to win a brand new pair of Zipp 404′s…. Additional perks include:

10 CEUs for USA Triathlon Certified Coaches
Raffle-Prize Giveaways Worth More Than $4,500

For additional information or to register please visit:

http://www.active.com/triathlon-conference/fitchburg-ma/fit-werx-new-england-triathlon-symposium-2011

Achilles Injury Flaring Up on Bike

Tuesday, September 14th, 2010

A version of this article was originally
published in Triathlete Magazine

Achilles Injuries on Bike

Question:

I experienced a bad injury to my Achilles tendon two years ago and have felt some discomfort on the bike ever since, especially if I go hard or climb. Is there anything with my equipment or position that may help?

Response:

Achilles injuries can be particularly frustrating as they can take so long to heal. On the bike, you can make changes to your position and equipment that will encourage minimal extension of the Achilles during pedaling, but it is equally important that you understand the role that your pedaling technique can play in the strain on your Achilles.

As discussed in the response about Morton’s neuroma, proper foot support can help some Achilles issues. Check with your doctor to find out any particulars you should be aware of when getting foot support for your cycling shoes. For example, some ruptured Achilles issues should not have the forefoot supported very aggressively and it is important that any footbed or orthotic you use takes this into account or further injury may occur. Larger platform, road specific pedals and shoes maximize lateral stability, which can be helpful for many Achilles issues and it is worth considering a more rear mounted cleat position on the shoe than average too. The further back your cleat is mounted, the more difficult it can be to drop the heel into dorsiflexion and overextend the sore tendon. Also, make sure your saddle is an appropriate height as low saddle positions can encourage the rider to drive the heel down at the bottom of the stroke.


How your bike and shoes are setup can encourage certain riding and pedaling technique, but it is up to you, the rider, to actually master the technique. In the case of many Achilles injuries, you want to minimize the extension of the tendon during pedaling by minimizing dorsiflexion at the ankle. Pedaling with a neutral or slightly plantar flexed (toe down) pedal technique is recommended. Likewise, try not to push or pull too hard on the pedals as heavy/imbalanced loads can increase strain on tendons. Being able to see your pedaling technique can be very helpful and we use Dartfish and Retul motion capture in our bike fittings since the video analysis as they are great communication tools. www.masterbikefitters.com offers a list of some other qualified fitters who employ Dartfish and other motion capture in their fittings.

Ride hard and smart.

Ian

Ian Buchanan is co-owner of Fit Werx. Fit Werx has locations in Waitsfield, VT and Peabody, MA and offers cycling and triathlon products, specialty bicycle fitting and analysis services, consultation, and technology research. Fit Werx can be reached in VT at (802)496-7570, in MA at (978)532-7348 or through the Web at www.fitwerx.com.

Crash

Monday, June 21st, 2010

By Dave Jordaan Level 1 Cycling Coach

“Cycling is inherently a dangerous activity”. Heard that phrase before? It is on the waiver you sign when you race your bicycle. Although a crash is not always inevitable it is probably likely so I have put together some guidelines on what to do if you crash.

A crash always comes unexpectedly but you will know the moment that you are going to go down. Item 6 below will explain in more detail my recommendations to fine tune your ‘crash instinct’ but let’s assume you have no choice and do go down. You find yourself on the road and you are slightly disoriented and probably a little embarrassed. Unless you are in a life-threatening situation remain just where you are. Your immediate reaction is to jump up – do NOT get up or even unclip from your bike. Feel for any sharp pain, dizziness etc. You will immediately be experiencing the early signs of shock so it takes some concentration to overcome the adrenaline rush. Take a few deep breaths until you are certain you have your heart rate under control and can think clearly. Often spectators will rush up to you and want to pick you up. Let them know if you are OK. Feel for any injury yourself. If you feel that you do not have any possible serious injury try to sit-up (do not stand – yet). Re-assess your situation again. Before you get up make certain you are functioning calmly. Now you can decide if you are going to stand and move off the road. Now you can use the assistance of other riders or spectators. Move to a cool spot to assess yourself, and your bikes’, damage. Do not be the “macho” athlete, just accept any assistance offered. Once you are sitting in cool spot ask someone to hand you your water bottle and try to drink as much as possible as shock is dehydrating your system.

If you are in a race I do not recommend that you finish the event unless it is absolutely necessary. Continue only if you are contending for a podium finish or if you have to finish a stage. If you are in a training ride then get yourself home as quickly and painlessly as possible – even if you think your injuries are only slight – as there is more than a physical reaction to a crash. Accept temporary 1st aid and then treat yourself at home unless you suspect a serious problem then get yourself to the emergency room as quickly as possible. Note: NEVER turn down a ride in an ambulance if you have to go to a hospital as emergency rooms will make you wait if you walk in but they are obliged to treat ambulance entries IMMEDIATELY (this will save you 2-3 hours, or more, in the waiting room).

Due to advances (mainly in burn victim research) we have learnt that if you keep the road rash ‘wet’ it will heal quicker and cleaner. To this end thoroughly clean (even if takes a scrub) any road rash wounds. Scrub out all dirt. This will hurt but it is critical for healing. Once the wound is 100% clean of dirt you should cover all broken skin areas with triple antibiotic ointment on a non-stick pad. You can then wrap the area up with a bandage (self stick bandages are a huge leap in bandage technology – check them out). Keep your wounds ‘wet’ until the skin is fully healed i.e. change the bandage once a day, wash if necessary and then re-apply the ointment treated non-stick pad and bandage up again.
Once the new skin has grown over (still pink and tender) start applying Vitamin E cream in place of antibiotic ointment. If the healing wound is going to be exposed to the sun use heavy sunscreen until the scar area is unnoticeable.
As an overview and part and parcel of your training you will need to assess why the crash happened? Here are some common causes of crashes that you should work on;

  1. Number one cause of crashes on the road is when your front wheel has crossed the rear wheel of the rider you are following. It is simply a case of you being too close when the leading rider changes line or brakes. Crossing wheels however is not a good reason to go down as it is easily recoverable. When the wheels touched you panicked and made the situation worse, and simply ‘fell’ off your bike! Set aside at least one training day every year to practice touching wheels and bumping.
  2. Next leading cause of crashes is “lack of concentration”. There is always a crash on the most boring sections and times of riding or racing. The reason that these types of crashes happen is that the PACK simply lost concentration. Immediately any pack slows, sits up, starts drinking or speeds up, surges, stands especially at the base of climbs when there is a rush of slower riders trying to get to the front when the front riders are slowing for the hill, etc. are all signs for you to immediately increase concentration of your surroundings (pack and environment). More importantly you should plan to counteract low blood glucose levels (caused by low liver glycogen) by taking in energy gels every 45 minutes. That will help you to maintain your concentration at all times.
  3. Next up is cornering. I work very hard at teach the skill of cornering during training. Please help me to help you (avoid crashing) by working on technique (not speed) during training. Practice all three basic cornering techniques. The safest is to steer your bike (bike upright and body bent into the corner) and the most dangerous is leaning (body and bike leaning ala Velodrome). The fastest (and most casual) is to counter-steer (body upright and bike leaning). Practice when and how to pedal into, through and out of corners during training. EVERY corner you negotiate, whether in a huge pack or solo, is an opportunity to hone your skill – do not waste it by not concentrating fully on your technique. Choose which technique you are going to use and then concentrate and learn. It helps tremendously if you can include a few mountain bike and/or track training (smooth spinning) sessions each year to sharpen bike handing skills.
  4. There are many riders in your pack who are naturally talented and/or have too much Power (strength + speed) Vs. Skill (or brains). “I am the strongest rider in the pack and not afraid of anyone or anything” riders are a danger to themselves and to you. Learn to recognize these wheels and then steer clear of them even if it means giving up a win, as the sprint is most often EXACTLY where skill will fail this rider and you will be trapped in their immediate future!
  5. Then of course there is the problem (most often witnessed in juniors and rookies) of not respecting the pack. I have an article on pack etiquette that you should check out. Riding regularly in a large pack under controlled environment will help to gain the experience needed to make the ride safer. Until you understand the personality of each pack you ride in do not try to change the character of the ride, as most experienced packs will not tolerate lack of respect. Disrespect most often leads to on-bike ‘discussions’ and/or crashes.
  6. Finally there is the issue of panic. Of course, someone else is always to blame in a crash but you need to understand that crashes are most often avoidable. A problem in the pack is not a reason for you to panic and go down. When you are heading for a typical pre-crash scenario (screech, shouting, panic, mayhem, I cannot avoid this and it looks like I am going to crash – yep, I am going to crash, CRASH), your 1st instinct must be to look for an avenue to escape personally. This may mean falling on top of or riding over other riders! It may mean hitting the dirt or soft fall. It could mean some cross country. Whatever the choice – survival is your primary objective. If you can keep your cool and not panic you are already ahead of the game. Staying cool and calm – even over 30MPH is definitely possible. Look for an avenue of escape. Most often it means accelerating not braking. Here are some guidelines;
  1. Do not look at any crash site at any time.
  2. There will be a feeling of panic in the pack.
  3. Immediately switch on your ‘anti-panic receptors’ and concentrate 100% on personal survival.
  4. If you have time go to your drops (if it was a fast or dangerous situation you should have been in the drops already), wrists straight, elbows out, body stiff and full hands on the brakes but do not pull on them (yet)
  5. Do not look around, to the side or behind you – keep concentration looking ahead using your peripheral vision to look for the gap to accelerate to (it will be there)
  6. Get out of trouble. It is a game of personal survival. It does not matter where you are heading (on-road, off-road, over bikes) just hold YOUR bike upright, firm and under control.
  7. Once you are heading out of the crash vicinity do not look back
  8. Do not stop until you are fully out of trouble
  9. Note: I recommend accelerating, or least just slowing down and then looking for an avenue of escape, rather than grabbing a handful of brakes because a sudden stop caused by a crash is a very common cause of serious back injury as the concertina effect (same as taking off from a stop) is exaggerated when you stop suddenly i.e. riders at the back of the group are still going 30mph and you have stopped. A blow from the behind caused by a speeding bike is often the cause of long term back damage! Be aware of this and if you have to stop then you must make every urgent attempt to get out of the way of the cyclists racing into the scene of the crash. If you are on the ground you must “cover up”. If you are not then get out of the way.

Finally: If you want to mitigate the possibility of injury then learn to land well. I recommend that you take a (even one-session) course in Judo or Gymnastics at the local dojo. This makes a huge difference in the result of a crash and is time very well invested (plus it is fun). Rolling well or simply not putting your wrists out is a technique that you can learn in these programs.  I have focused this paper on the road but mountain bikers will find plenty of useful information here as well. Mountain bikers however must include a few cycles of training each year that incorporate technical bike handling skills.

I would like to personally thank Dave Jordaan for providing this article and believe it is a great resource to all cyclist whether road, mountain, or even BMX.

Article provided by Kinetic Loop Training Systems (www.kineticloop.org)

Out of Matches?

Tuesday, June 8th, 2010

By Mike Burris of Impulse CYCLEsport

There is a quote from Joe Friel in his book, The Cyclist’s Training Bible, that I believe is the single greatest nugget of wisdom in that book. It reads, “Every time you put your wheel on the starting line there is an emotional investment. After some number of these in a short period of time, the rider loses enthusiasm. It’s as if you only have so many matches to burn, and once they are all used up, the body and mind are unwilling to continue.”

This quote comes from Friel’s section on “Racing into Shape” as a method of training. The idea is to build a base of 1000 miles of easy riding and then race as much as possible. In our area you can race on the weekends, do a Tuesday World’s ride, and a Thursday night time trial every week if you want to. For some, the mental and physical cost of riding hard this much is fine and does produce good results. For many, especially masters racers, training this way quickly leads to burnout.

Here’s why:

Consider a competitive, category 3-masters racer that trains 12 hour a week. Assume this rider can produce 4 watts/kg at threshold. If this rider races in a master field or often rides with local, elite riders then this rider will have to dig deep to compete. Said another way, this rider will burn significantly more “matches” on a fast group ride or in a race than the better riders in his field or group. (A “match” is a term used to describe efforts well above threshold for longer than 30 seconds). This means recovery will take longer and the long-term impact or cumulative fatigue will be greater.

Why is this important? Many riders consider local world’s rides, training criteriums, or time trials merely part of their training and not races per se. This can very well be the case depending on the efforts. However, if a rider is regularly putting in more than a few efforts well above threshold (i.e. burning a lot of matches) then these events will take the same toll as races. Furthermore, there is a much higher emotional investment in these rides than there is in doing sets of intervals because of the “competition” factor. If this rider is also racing a lot, then the “matchbook” quickly becomes empty.

The take away message here is to be careful about riding too hard, too much. Just because you see others racing every weekend as well as doing every local event there is, does not mean it is good for you. I am convinced that mental fatigue is just as detrimental as physical fatigue. The two together can ruin a season. Take plenty of rest between hard days, especially if they are really hard days. When you see your enthusiasm start to wane, back it down and ride easy or rest altogether.

Do not feel like you have to be at every local event every week or race every weekend. Make sure they fit your training plan. And, if you do choose to attend, monitor your efforts. Save your matches for when you really need them.

Mike Burris is the Director of Impulse CYCLEsport. Mike is a USA Cycling certified coach, the Training Director at epicPlanet.tv, and the Team Director of the Burris Logistics-Fit Werx Masters Racing Team. Mike always enjoys working with a variety of athletes. For more information go to www.impulsecyclesport.com

Iliotibial Band Friction Syndrome

Wednesday, June 2nd, 2010

By Joshua Dubin, D.C., C.C.S.P.

Running has increased in popularity for cardiovascular fitness and sport over the last decade (1,2,3,4). It has been estimated that approximately 30 million Americans run for exercise (5). However, it has also been projected that one-half to two-thirds of those runners may sustain a non-traumatic repetitive strain injury at least once (5,6). Iliotibial band friction syndrome (ITBFS) is an inflammatory, repetitive strain injury to the knee that is particularly common in long distance runners (1,7,8,9,10). ITBFS may be caused by a multitude of factors including training errors, worn out running shoes, and/or lower leg misalignments (1,4,11,12,13,14,15,16). The main symptom of ITBFS is a sharp pain on the outer aspect of the knee that can radiate into the outer thigh or calf (17,18,19). Knee pain usually occurs at a particular distance of each training run, probably due to muscle fatigue (1,12), and is more pronounced shortly after the foot contacts the ground surface (20). Attempting to run throughout the pain will intensify the symptoms, eventually causing the athlete to shorten his stride or walk. The frustrated athlete, who may be training for a race, will not be able to progress his mileage appropriately. However, the despondent runner may be unreceptive to advice to temporarily discontinue running and initiate therapy, resulting in a more severe grade of injury. Pain may now be present with walking, exacerbated by walking up or down stairs, and a stiff-legged gait may be acquired to relieve symptoms (21). Based on clinical experience and as a recreational runner, I have identified several reasons why most athletes are unwilling to temporarily discontinue running: it is a time-efficient exercise; genuine friendships are formed in group training; no other cardiovascular exercise can beat the “runner’s high”; and the fear of not attaining his or her training goal. My experience and research studies show conservative therapy to be extremely successful in the treatment of ITBFS (8,22). A proper treatment protocol should include the following: inflammation reduction, pain-free training modification, flexibility and endurance strength training of the muscles surrounding the pelvis and thigh, and correction of faulty training habits (1,2,7,8,9,10,11,12,13,23,24). Read the full article here…ITB Friction Syndrome

Blast the Competition!

Tuesday, May 18th, 2010

Jason Gootman & Will Kirousis

Tri-Hard Endurance Sports Coaching

You know who you want to beat. Your friend, your sister-in-law, that guy that always seems to win your age group. The only way you’re going to beat them is to better yourself. Here’s five ways to do just that and blast the competition this summer.

Devour Hills

If it were possible to swim up hills, we’d tell you to do that. That’s how great hill workouts are. No matter what your current ability level is, riding and running up hills will make you better. There’s no better workout.

For both cycling and running, find hills in your area that take you anywhere from 30 seconds to five minutes to ride and run up. Sandwiched between a good warm-up and cool-down, work up to a set of 15-30 minutes of work intervals.

For example, 16 X 1’, 8 X 3’, 6 X 5’. Ride/run up the hill at an intensity that is +/­eight BPM of your average heart rate in a 12-mile or 30-minute time-trial (for cycling) and a three-mile time trial or recent 5-k race (for running). For example, if you averaged 160 BPM In a recent 12-mile time trial for cycling, do your work intervals at 152-168 BPM. Go hard, but pace yourself, parcel out your effort, for the whole set of intervals, just as you would do in a race. You want to get as far up the hill, or further up the hill, on your last interval as you did on your first interval.

For the rest interval, for cycling, coast down the hill practicing your descending skills. For running, run easy down the hill, staying light on your feet.

For cycling, stay seated for most intervals and most hill workouts. But mix in some standing climbing for variety. For example, you could do 8 X 3’, where you stayed seated for the first 2’ 45” of each climb, then stood for the last 15”. Or for 16 X 1’, you could stay seated for all intervals except for numbers 4, 8, 12, and 16, for which you’d stand. Mix things up, but keep climbing those hills.

Read more…Blast the Competition cont.

Saddle Comfort and Pedaling Technique

Saturday, December 4th, 2004

originally published in Triathlete Magazine

I’ve been fit to my triathlon bike and I feel like my position is pretty comfortable and efficient. However, despite trying a number of different saddles and shorts, I still have nagging problems with saddle discomfort. Do you have any other suggestions that might help?

Susan , TX

Dear Susan,

It sounds like you have explored potential fit related issues, ranging from weight distribution to leg length differences, that might be contributing to your saddle comfort. You have also tried a variety of saddle and short designs, so I am not going to comment further on these important pieces of equipment. Outside of proper positioning and product selection, what is left that could be contributing to saddle issues? In short, pedaling technique.

In my experience, riders who have smoother and more circular pedal strokes at a relatively rapid cadence (80-100) have lower incidences of comfort related issues than riders with less balanced and slower strokes. Why? Riders who pedal efficient circles have more balanced muscle groups (thus reducing strain) and are more balanced in the saddle. So, what constitutes a balanced and efficient stroke and how do you develop one? A balanced stroke means that you are recruiting a variety of muscles throughout the entire range of the pedal circle. An outline of one revolution of the pedals on the drivetrain side of the bike demonstrates what muscles can be used, when you can use them, and how is below.

Through the front of the stroke (centering at 3 o’clock on the drivetrain side of the bike) the primary muscles being used are the quadriceps. The front of the stroke is an area that most riders do not need to focus much attention on as the quadriceps tend to work by default when riding a bike. It is through the bottom, back and top of the stroke where optimal muscle recruitment requires a more active technique, so these are the areas of the stroke where I am going to focus.

Once you are through the front of the stroke and heading into the bottom of the stroke (about 5 o’clock), you want to start transferring muscle engagement in the upper leg from the quadriceps to the hamstrings. Entering the bottom of the stroke, focus on keeping your heel flat and pulling your foot through and back (as if you were wiping mud off the bottom of your foot). If done properly, you will feel the muscles around your shin engage as the transfer from the quadriceps to the hamstrings (pushing to pulling muscles) takes place. As you come around to the back of the stroke (from about 7 o’clock on) focus on unweighting the foot by pulling your instep up against the top of your shoe with your calf and hamstrings. Many riders will lift their heel slightly at this point (ankling) to assist with fluidity of the stroke and active muscle engagement.

To complete the transition to the hamstrings successfully, you want to make sure that your pelvis is tilted (rolled) forward on the saddle (sitting on your pelvic platform). The easiest way I’ve found to describe this position is to have you think about your pelvic position when you are getting out of a chair. The hamstrings need to be at nearly a 90 degree angle to the pelvis to fire effectively and lift us from the chair. To get up from a chair, we flatten our backs, tilt the pelvis forward (lifting the sit bones), engage the hamstrings, and stand. Try it and think about how the muscles are working and you’ll understand how this can work on a bike. From a positioning perspective, this same pelvic tilt that allows you to stand from the chair needs to happen on the bike if you want to engage your hamstrings optimally. Once you are past the back of the stroke (around 9 o’clock), the hamstrings are assisted by the glutes before the stroke enters another potential “flat spot” at the top (11 to 1 o’clock) of the stroke.

The top of the stroke is arguably the most difficult to maintain active muscle recruitment because it requires use of the hard to activate hip flexor and psoas (core abdominal) muscles. To engage these muscles around the top of the stroke, push the instep of your foot into the tongue of the shoe, driving and pushing the pedal across the top of the stroke, and helping you keep momentum. Once through the top of the stroke, bring the foot back towards horizontal to the ground as you head back into the quadriceps based pushing muscles through the front of the stroke again.

From a training perspective, focus on one portion of your pedal stroke at a time. Once you master sections independently, it will be easier to integrate them. Also, expect it to feel like additional work at first and to require practice. You are asking muscles to fire in patterns they are not used to and they need to gain strength and familiarity with those demands before they will work optimally. An experienced cycling coach can also be a valuable resource in regards to helping you develop an optimal pedaling technique.

A rider who pedals efficient circles will have more balanced muscles groups (thus reducing strain on everything from the neck and shoulders to the lower back) and will sit on the bike more evenly, thus minimizing uneven saddle pressure and the likelihood of discomfort. Proper pedaling technique can also allow you to ride significantly faster with the same amount of energy expenditure. Remember that the impending winter is a great time to focus on details, like pedal stroke, that can make 2005 your most comfortable and efficient season ever.

Good luck.

Ian

Fitting Travel To Fit Fit Werx Gives Back Watch Rider First Video Watch Proper Fit Video Sign Up Newsletter and Blog Visit Products Site Email Contacts email Fitwerx Massachusetts email Fitwerx Massachusetts Fitting Logos US Triathlon Triathlete Magazine Insta Print Retul Slow Twitch SICI DartFish Master Bike Fitters Association Brands We Carry Parlee Cycles Serotta Giro Felt HED Reynolds Zipp SiDI MOOTS Cervelo Cycles Mavic Guru Easton More Brands